Quartz Countertop Cost Mississauga & GTA: 2026 Price Guide

The short answer: Quartz countertops in Mississauga and the GTA typically run $70–$130 per square foot installed, with most mid-range kitchens landing around $90–$110/ft². A standard 30–40 sq ft kitchen counter runs $2,500–$5,000 all-in for mid-grade quartz, before HST. Premium colours, waterfall edges, and complex cutouts push well past that.

Quartz has become the default countertop material in the GTA for a simple reason: it doesn't need sealing, the pattern is consistent slab to slab, and it holds up to daily kitchen use better than most natural stone. But "quartz countertops cost $50 to $200 a square foot" — which is what most national guides tell you — isn't a useful number to plan a Mississauga kitchen around. Here's a more specific breakdown.

What quartz countertops cost in the GTA

These figures include standard installation — templating, cutting, edge finishing, and basic sink cutout. They assume a straightforward kitchen layout with a single slab or minimal seaming.

Why "per square foot" numbers vary so much between sites: most U.S.-based cost guides quote raw material cost only ($30–$90/ft²) and add labour separately ($20–$40/ft²). In the GTA, quotes are almost always given as one installed number, which is why our range looks tighter and more usable for actual budgeting.

What we stock

We carry 23 quartz colours, from clean solid whites to marble-look veined patterns — Venato Carrara, Statuario Caldia, Taj Mahal, Polar White, and Urban Noir among them. Every colour is quoted after templating rather than sold at a headline rate, so the number you get reflects your actual layout, edge profile and cutouts. Delivery and installation within 100 km of Mississauga are included.

Because we supply the slab and handle fabrication and install as one team, your quote separates cleanly into material cost and labour — the same approach we use for flooring and tile.

What pushes the price higher

Four things move a quartz quote more than colour choice does:

• Waterfall edges. Wrapping quartz down the side of an island consumes significant extra slab. Typically adds $800–$2,000 depending on island height and slab yield.
• Edge profile. A standard eased or bullnose edge is included in most quotes. Ogee, mitred, or waterfall-mitred edges add $15–$40 per linear foot.
• Sink and cooktop cutouts. Each cutout typically adds $100–$300, more for an undermount sink requiring polished edges around the cutout.
• Seams. Large or L-shaped kitchens may need more than one slab. Fewer seams look better but require a bigger slab (more waste, higher cost) — this is often the single biggest driver of "why is my quote higher than my neighbour's."

A note on slab size: most quartz slabs run roughly 120" x 55". A large island or wraparound counter can exceed this, forcing a seam whether you want one or not. Ask your fabricator to show you the slab layout before finalizing your order — it's the easiest way to understand where your money is going.

Quartz vs. granite vs. laminate

Quartz vs. granite in one line: quartz is manufactured, so pattern and colour are consistent slab to slab and it never needs sealing. Granite is natural stone — every slab is unique, but it's porous and should be resealed roughly every 1–2 years to resist staining.

Installation timeline

Templating happens after cabinets are installed, not before. This is normal — it's the only way to get an exact fit — but it means countertops are usually the last major step in a kitchen renovation, not one you can order in parallel with everything else.

Planning the wider project? Our kitchen renovation cost guide and bathroom renovation cost guide cover where countertops sit in a full budget.

Frequently asked questions

Is quartz worth the extra cost over laminate?
For most kitchens, yes. Quartz resists heat, scratches, and stains far better than laminate, and it's one of the features buyers specifically look for when a home goes on the market in the GTA.

Do quartz countertops need sealing?
No. Unlike granite or marble, quartz is non-porous and manufactured — it never needs sealing.

How long does quartz countertop installation take?
The install itself is one day. The full process — from templating to fabrication to install — typically takes 1–2 weeks after your cabinets are in place.

Can I get a waterfall edge on any quartz colour?
Most colours support it, but heavily veined patterns need careful slab selection so the veining lines up across the waterfall edge. Ask to see the slab layout before you commit.

Is granite cheaper than quartz?
It can be, depending on the granite grade — but granite requires periodic resealing that quartz doesn't, which adds to its cost over time.

Cost ranges reflect typical Mississauga and GTA market figures for 2026 and are provided for planning purposes — they are not a quote. Every project is priced after an on-site assessment.